SMAM & State DBT Schemes 2026Govt Test Report & GST Bill Included
🚜 Calculate Your Government Subsidy & Farmer Payable Cost
Estimate your exact out-of-pocket payment and DBT bank credit based on your state and farmer category.
₹
Direct DBT Subsidy (अनुदान राशि)₹16,000Credited directly to farmer's Aadhaar-linked bank account
Your Net Machine Cost (किसान की लागत)₹16,000Effective cost after government subsidy reimbursement
🏛️
Madhya Pradesh e-Krishi Anudan: Available for Power Weeders, Chaff Cutters & Sprayers under SMAM & Sub-Mission on Mechanization. Official testing report and GST invoice provided for instant portal upload.
Direct Farmer Guidance2026 Chainsaw Guide Bar & Engine Sizing
For orchard maintenance, pruning dead branches, firewood splitting, and small tree felling (trunks under 16 inches diameter), choose a 58cc 2-Stroke Petrol Chainsaw with 18-inch or 20-inch Guide Bar (₹9,000–₹10,780) for superior balance and reduced operator fatigue. For heavy commercial timber harvesting, hardwood felling (eucalyptus, teak, mango, acacia/babul), and sawmill log bucking, select a 62cc–75cc Heavy Duty Chainsaw with 22-inch Bar (₹10,000–₹12,030) delivering 3.5HP to 4.2HP to prevent chain bogging in dense hardwood heartwood.
🪚 Chain Pitch & Gauge: 0.325" pitch / 0.058" gauge standard for easy replacement⛽ Fuel Mix: 25:1 petrol to 2T oil ratio for break-in | 40:1 with synthetic JASO-FD🛡️ Safety: Inertia front hand guard chain brake stops rotation in <0.12 seconds on kickback
Chainsaws Buying Guide
Chainsaws should be selected by the material being cut or moved, operator experience, engine or motor type, cutting attachment, spare support and safety requirement. Use this collection as a shortlist, then verify exact model specifications on the product page.
Selection chart
Requirement
Suggested direction
Check before ordering
Wood, branches or firewood
Chainsaw or pole pruning tool
Bar length, cc/power, chain spec and PPE
Hedges and shrubs
Hedge trimmer
Blade length, tooth gap, weight and lubrication
Maintained lawn grass
Lawn mower
Cutting width, height setting and blade support
Leaves, dust and light debris
Leaf blower
Airflow, nozzle, filter and carrying style
Related guides and brands
Frequently asked questions
What guide bar size should I choose: 18 inch, 20 inch, or 22 inch?
An 18-inch bar is ideal for general farm use, firewood cutting, and orchard pruning up to 15-inch logs because it maintains lower front-end weight. A 22-inch bar is recommended for felling full-grown eucalyptus, babul, and teak trees or cutting logs over 18 inches in diameter in a single clean pass.
Why is chain lubrication oil separate from 2T engine fuel?
A petrol chainsaw has two distinct oil reservoirs: one for 2T oil mixed into the petrol to lubricate internal piston/crankcase components, and a dedicated bar oil reservoir with an automatic oil pump that continuously lubricates the chain teeth sliding at high speed against the guide bar groove to prevent chain overheating.
How can I prevent dangerous chainsaw kickback during operation?
Never cut with the upper tip quadrant of the guide bar (the kickback zone). Always ensure the inertia chain brake is functional, maintain correct chain tension (so the drive links don't slip out of the bar groove), and grip both handles firmly with wrapped thumbs at full throttle.
How do I sharpen a dull chainsaw chain in the field?
Use a 4.8 mm (3/16 inch) round file held at a 30-degree angle to the cutting tooth. File each cutter tooth with 3 to 4 even forward strokes from inside to outside, ensuring equal tooth length on both left and right sides.
Royal Kissan
